FREE SHIPPING
Free shipping on all US order or order above $200
TDR-240-24
45.26
Details
Meanwell TDR-240-24 is one economical slim 240W Din rail power supply with 24V10A0-10A240W100mVp-p24-28V. The model adapts to be installed on TS-35/7.5or TS-35/15 mounting rails. The body is designed just 63mm in width, which could save a lot of space inside the cabinet. Moreover, TDR-240-24 adopts the full range АС input from Зѱ З40VАС to 550V АС ( Dual phase operation possible) and conforms to BS EN/EN6 1000-3-2, the norm the European Union regulates for harmonic current. In addition, Meanwell TDR-240-24 is designed with metal housing that enhances the power dissipation. With the working efficiency reaching up to 92 %, the product could operate at the ambient temperature between-30℃ and 70℃ under air convection. Moreover, It is equipped with constant current mode for over-load protection, fitting various inductive or capacitive applications. The complete protection functions and relevant certificates for industrial control apparatus (UL61010-1, UL61010-2-201, BS EN/EN61558-1, BS EN/EN61558-2-16, EAC TP TC 004approved, and etc.) make TDR-240-24 a very competitive power supply solution for industrial applications.
Meanwell TDR-240-24 Encoding
| TDR | Series Name |
| 240 | Rated Wattage |
| 24 | Output Voltage |
Meanwell TDR-240-24 Specifications
| Model | TDR-240-24 | |
| Output | DC VOLTAGE | 24V |
| RATED CURRENT | 10A | |
| CURRENT RANGE | 0-10A | |
| RATED POWER | 240W | |
| RIPPLE & NOISE (max.) | 100mVp-p | |
| VOLTAGE ADJ. RANGE | 24-28V | |
| VOLTAGE TOLERANCE | ±1.0% | |
| LINE REGUL ATION | ±0.5% | |
| LOAD REGULATION | ±1.0% | |
| SETUP, RISE TIME | 2000ms, 60ms/400VAC 1500ms, 60ms/500VAC at full load | |
| HOLD UP TIME | 20ms / 400VAC 40ms / 500VAC at full load | |
| Input | VOLTAGE RANGE | Three-Phase 340 ~ 550VAC (Dual phase operation possible in connecting L1,L3,FG or L2,L3,FG) or 480 ~ 780VDC |
| FREQUENCY RANGE | 47 - 63Hz | |
| POWER FACTOR (Typ.) | PF>=0.53/400VAC PF>=0.52/500VAC at full load | |
| EFFICIENCY (Typ.) | 92.00% | |
| AC CURRENT (Typ.) | 0.69A/400VAC 0.6A/500VAC | |
| INRUSH CURRENT (Typ. ) | COLD START 50A | |
| LEAKAGE CURRENT | <2mA / 530VAC | |
| PROTECTION | OVERLOAD | 105 ~ 130% rated output power |
| Protection type : Constant current limiting, unit will hiccup after 3 sec | ||
| OVER VOLTAGE | 30 ~ 36V | |
| Protection type : Hiccup mode, recovers automatically after fault condition is removed | ||
| OVER TEMPERATURE | Shut down o/p voltage, recovers automatically after temperature goes down | |
| FUNCTION | DC OK REALY CONTACT RATINGS (max.) | 60VDC/0.3A, 30VDC/1A, 30VAC/0.5A resistive load |
| ENVIRONMENT | WORKING TEMP | -30 ~ +70℃(Refer to "Derating Curve") |
| WORKING HUMIDITY | 20 ~ 95% RH non-condensing | |
| STORAGE TEMP., HUMIDITY | -40 ~ +85℃, 10 ~ 95% RH non-condensing | |
| TEMP. COEFFICIENT | ±0.05%/℃(0 ~ 60℃) | |
| VIBRATION | Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 | |
| OPERATING ALTITUDE | 5000 meters | |
| OVER VOLTAGE CATEGORY | Ⅲ; According to EN61558, EN50178, EN60664-1, EN62477-1, EN60204-1; altitude up to 2000 meters | |
| SAFETY &EMC | SAFETY STANDARDS | UL61010-1, UL61010-2-201, BS EN/EN61558-1, BS EN/EN61558-2-16, AS/NZS 62368.1, EAC TP TC 004 approved |
| WITHSTAND VOLTAGE | I/P-O/P:4.87KVAC I/P-FG:2.4KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC | |
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25℃/ 70% RH | |
| EMC IMMUNITY | BS EN/EN55024 , BS EN/EN61204-3 | |
| Others | MTBF | 515.4K hrs min. Telcordia SR-332(Bellcore); 215.6K hrs min. MIL-HDBK-217F (25℃) |
| DIMENSION | 63*125.2*113.5mm (W*H*D) | |
| PACKING | 1Kg ; 12pcs/13Kg/1.22CUFT | |
Meanwell TDR-240-24 Features
l 63mm slim width
l DC OK relay contact
l 3 years warranty
l Built-in passive PFC function compliance to BS EN/EN61000-3-2
l High efficiency 92% and low power dissipation
l Protections: Short circuit/Overload/Over voltage/Over temperature
l Cooling by free air convection
l Full power between -30~+60℃
l Built-in constant current limiting circuit
l Can be installed on DIN rail TS 35/7.5 or 15
l UL61010(industrial control equipment) approved
l BS EN/EN61000-6-2(BS EN/EN50082-2) industrial immunity level
l Three- Phase 340 ~ 550VAC wide range input (Dual phase operation possible)
Meanwell TDR-240-24 Applications
l Industrial control system
l Semiconductor fabrication equipment
l Factory automation
l Electro-mechanical apparatus
Meanwell TDR-240-24 Mechanical Diagram
More Information
| Brand | Meanwell |
|---|
Custom Tab
Abundant supply to meet market demand. The warehouse is rich in goods with all kinds of commodities, which Can meet the needs of different customers.
Fast delivery and high efficiency. The warehouse has sufficient supply, when customers need to order, we can quickly find the goods, and deliver out, which effectively improves the efficiency and saves valuable time for customers
Our products have more advantages in price. We always believe that you should enjoy higher quality with lower price. Therefore, we are committed to providing consumers with the most cost-effective products.
No matter how great our goals are, or how many great things waiting for us to do, we must keep our promises and do it well. Because these is one word that cannot be missing in the secret of success. That is "integrity".
Reviews 1
Write Your Own Review
Related Products By Brand
DELIVERY & RETURNS
Custom static block for product detail
SUPPORT 24/7
Contact us 24 hours a day, 7 days a week
30 DAYS RETURN
Simply return it within 30 days for an exchange.
100% PAYMENT SECURE
We ensure secure payment with PEV